Section 2: Mix and Pour SP48

image 5
Pour equal amounts of Parts "A" + "B"

image 6
Mix "A" + "B" together

image 7
Fully blended "A" + "B" parts

image 8
Pour SP48 into the frame, pouring slowly from one corner only.  This allows the material to flow around and under the prototype with little or no air entrapment.

image 9
Finishing pour of SP48

image 10
Fully poured mold

^{Previous Section            Next Section}

113 Meadow Street, Hackensack, NJ 07601
Phone: 201-489-4040   Fax: 201-489-4949   Email: info@sedtek.com